Thermo Orion
Seit über 40 Jahren sind Orion-Produkte bekannt für qualitativ hochwertige Messgeräte, Elektroden und Lösungen für elektrochemische Analysen. Die Produkte werden in einer breiten Palette von Industrien für eine Vielfalt von Labors und Feldanwendungen verkauft. Das Ziel des Wasserqualitäts-Produktangebots ist der Schutz von Mensch und Umwelt. Nachfolgend finden Sie eine Zusammenstellung von einigen der vielen Anwendungsmöglichkeiten für unsere Produkte.
Beispielanwendungen für Orion Produkte:
-
- pH
- Trinkwasser
- Abwasser
- Kosmetika
- Nahrungsmittel und Getränke
- Pharmazeutika
-
- ISE
- Trinkwasser - Fluorid, Cyanid
- Abwasser - Ammoniak
- Wein - Kalium
- Milchprodukte - Chlorid, Calcium
- Handelsübliche Pharmazeutika - Calcium, Fluorid
-
- Titration
- Trinkwasser
- Abwasser
- Chemie
- Petrochemie
- Pharma
- Kosmetik
- Nahrungsmittel und Getränke
-
- Kolorimetrie
- Trinkwasser - Freies und Gesamtchlor, -fluorid
- Wasserqualität - Phosphat, Nitrat
-
- Turbimetrie
- Trinkwasser
- Wasserqualität
- Wein - Kalium
- Milchprodukte - Chlorid, Calcium
- Handelsübliche Pharmazeutika - Calcium, Fluorid
-
- Leitfähigkeit
- Trinkwasser
- Pharma
- Zellstoff und Papier
- Umwelt
-
- gelöster Sauerstoff
- Abwasser
- Wasserqualität
- Aquakulturen
- Brauereien und Weinkellereien
Messgerät für pH, COND, DO, ISE
Projektierung auf Anfrage.
Spezifikation:
1102PH | |
pH Range: | - 2.00 to 16.00 |
Accuracy: | 0.01 pH |
Resolution: | 0.01 pH |
mV Range: | to 100%/-1000 to 1000mV |
Accuracy: | 1.0 mV |
Resolution: | 1 mV |
Temperature: | 125.0 °C (14.0 to 257.0 °F) |
Resolution: | 0.1 °C / °F |
Relative Accuracy | 1.0 °F) |
Temperature Sensor: | Ptl00/ Pt1000 (jumper selectable); 2 or 3 wire |
Temperature Compensation: | Auto / manual (reference at 25°C) |
pH input: | BNC (impedance); Asymmetrical / Symmetrical |
Set-point and Controller functions - relay 1,2: | |
Function (switchable): | P/PI contra I (pulse length/pulse frequency); limit control |
Integral time: | to 999.9 minutes |
Adjustable period with pulse length controller: | 0.5 to 20 sec. |
Adjustable period with pulse frequency controller: | 60 to 120 pulses/min |
Dropout delay: | to 2000 seconds |
Wash cycle: | 0.1 to 199.9 hours |
Wash duration: | 1 to 1999 seconds |
Switching Dissolved oxygen hysteresis: | to 10 % of full scale |
Contact outputs, controller: | 1 SPDT, 3 SPST relays |
power: | Max. 250 VAC / Max 3A / Max 600VA - resistive load only |
Alarm functions: | |
Function (switchable): | Latching / pulse |
Pickup delay: | to 2000 seconds |
power: | Max. 250 VAC / Max 3A / Max 600VA - resistive load only |
Alarm control | Steady or pulse |
Contact outputs | 1 SPDT reJay |
Display: | |
LCD: | UV coat, backlit 14 segments display with symbols for status information |
Backlight: | On/Off selectable with four level of brightness contral |
Electromagnetic compliance (EMC) specifications: | |
Emitted interference: | According to EN 50081-1 |
Immunity to interference: | According to EN 50082-1 |
Environmental conditions: | |
Ambient temperature operating range: | to 40°C |
Maximum relative humidity: | 80% up to 31°C decreasing linearly to 50% at 40°C |
Power supply: | |
Input: | 80 to 250 VAC/DC 50/60 Hz Approx. 10VA |
Main fuse: | 250 mA anti-surge, S504 BUSSMANN |
Transient overvoltage category: | 11 |
Pollution degree: | 2 |
Electrical data and connections: | |
Signal output: | Two 0/4 to 20 mA outputs for pH and temperature, galvanically isolated |
Load: | (1 |
Connection terminal: | 3-pin, 8-pin, 9-pin and 13-pin terminal, detachable blocks |
Mechanical specifications: | |
Dimensions (W x H x D): | 144 x 144 x 111.5 mm |
Weight: | 745g (unit) / 1100g (Packed) |
Environmental rating: | IP 65 (NEMA 4X) |
Messgeräte für pH, COND, DO, ISE
Projektierung auf Anfrage.
Spezifikation:
1103DO | |
Dissolved Oxygen measuring range: | 0.00 to 20.00 mg/I or 0.0 to 200.0% saturation |
Relative accuracy: | 1.5 % of full scale reading for both ranges |
Resolution: | 0.01 mg/l or 0.1 % |
Temperature measuring range: | 125.0 °C (14.0 to 257.0 °F) |
Resolution: | 0.1 °C / °F |
Relative accuracy | 1.0 °F) |
Temperature sensor: | Ptl00 /Ptl000 (jumper selectable); 2 or 3 wire |
Temperature compensation: | Auto / manual |
Pressure compensation: | kPa / mmHg (Manual setting and automatie correction) |
Salinity compensation: | 0.0 to 50.0 ppt (g/L) (Manual setting and automatie correction) |
Dissolved Oxygen input: | Screw terminal |
Set-point and Controller functions - relay 1, 2: | |
Function (switchable): | P/PI contra I (pulse length/pulse frequency); limit contra I |
Integral time: | to 999.9 minutes |
Adjustable period with pulse length controller: | 0.5 to 20 sec. |
Adjustable period with pulse frequency controller: | 60 to 120 pulses/min |
Dropout delay: | to 2000 seconds |
Wash cycle: | 0.1 to 199.9 hours |
Wash duration: | 1 to 1999 seconds |
Switching Dissolved oxygen hysteresis: | to 10 % of full scale |
Contact outputs, controller: | 1 SPDT, 3 SPST relays |
power: | Max. 250 VAC / Max 3A / Max 600VA - resistive load only |
Alarm functions: | |
Function (switchable): | Latching / pulse |
Pickup delay: | to 2000 seconds |
power: | Max. 250 VAC / Max 3A / Max 600VA - resistive load only |
Alarm control | Steady or pulse |
Contact outputs | 1 SPDT relay |
Display: | |
LCD: | UV coat, backlit 14 segments display with symbols for status information |
Backlight: | On/Off selectable with four level of brightness contra I |
Electromagnetic compliance (EMC) specifications: | |
Emitted interference: | According to EN 50081-1 |
Immunity to interference: | According to EN 50082-1 |
Environmental conditions: | |
Ambient temperature operating range: | to 40°C |
Maximum relative humidity: | 80% up to 31°C decreasing linearly to 50% at 40°C |
Power supply: | |
Input: | 80 to 250 VAC/DC 50/60 Hz Apprax. 10VA |
Main fuse: | 250 mA anti-surge, S504 BUSSMANN |
Transient overvoltage category: | 11 |
Pollution degree: | 2 |
Electrical data and connections: | |
Signal output: | Two 0/4 to 20 mA outputs for pH and temperature, galvanically isolated |
Load: | 0 |
Connection terminal: | 3-pin, 8-pin, 9-pin and 13-pin terminal, detachable blocks |
Mechanical specifications: | |
Dimensions (W x H x D): | 144 x 144 x 111.5 mm |
Weight: | 745g (unit) / 1100g (Packed) |
Environmental rating: | IP 65 (NEMA 4X) |
Messgeräte für pH, COND, DO, ISE
Projektierung auf Anfrage.
Spezifikation:
1104CO | |||
Conductivity measuring range: | Conductivity Measuring Range | Resolution | |
1 | to 2.000 µS/cm | 0.001µS/cm | |
2 | to 20.00 µS/cm | 0.01 µS/cm | |
3 | to 200.0 µS/cm | 0.1 µS/cm | |
4 | to 2000 µS/cm | 1 µS/cm | |
5 | to 20.00 mS/cm | 0.01 mS/cm | |
6 | to 200.0 mS/cm | 0.1 mS/cm | |
7 | to 1000 mS/cm | 1 mS/cm | |
Relative accuracy: | ± 1. % of full scale reading (± 2 % > 500 mS/cm) | ||
System acuracy: | Total system accuracy dependent upon sensor specification | ||
Temperature: | -10.0 to + 125.0 °C (14.0 to 257.0 °F) | ||
Resolution: | 0.1 °C / °F | ||
Relative accuracy | ± 0.5 °C (± 1.0 °F) | ||
Temperature sensor: | Ptl00 /Ptl000 (jumper selectable); 2 or 3 wire | ||
Temperature compensation: | Auto / manual | ||
Conductivity input | Screw terminal | ||
Set-point and Controller functions - relay 1,2: | |||
Function (switchable): | P/PI control (pulse length/pulse frequency); limit contral | ||
Integral time: | 0 to 999.9 minutes | ||
Adjustable period with pulse length controller: | 0.5 to 20 sec. | ||
Adjustable period with pulse frequency con- | 60 to 120 pulses/min | ||
troller: | 0 to 2000 seconds | ||
Pickup I Dropout delay: | 0.1 to 199.9 hours | ||
Wash cycle: | 1 to 1999 seconds | ||
Wash duration: | 0 to 10 % of full scale | ||
Switching Dissolved oxygen hysteresis: | 1 SPDT, 3 SPST relays | ||
Contact outputs, controller: | Max. 250 VAC / Max 3A / Max 600VA - resistive load only | ||
Switching voltage I current I power: | |||
Alarm functions: | |||
Function (switchable): | Latching / pulse | ||
Pickup delay: | 0 to 2000 seconds | ||
Switching voltage I current I power: | Max. 250 VAC / Max 3A / Max 600VA - resistive load only | ||
Alarm control | Steady or pulse | ||
Contact outputs | 1 SPDT relay | ||
Display: | |||
LCD: | UV coat, backlit 14 segments display with symbols for status | ||
Backlight: | information | ||
On/Off selectable with four level of brightness control | |||
Electromagnetic compliance (EMC) specifications: | |||
Emitted interference: | According to EN 50081-1 | ||
Immunity to interference: | According to EN 50082-1 | ||
Environmental conditions: | |||
Ambient temperature operating range: | 0 to 40 °C | ||
Maximum relative humidity: | 80% up to 31 °C decreasing linearly to 50% at 40°C | ||
Power supply: | |||
Input: | 80 to 250 VAC/DC 50/60 Hz Approx. lOVA | ||
Main fuse: | 250 mA anti-surge, S504 BUSSMANN | ||
Transient overvoltage category: | II | ||
Pollution degree: | 2 | ||
Electrical data and connections: | |||
Signal output: | Two 0/4 to 20 mA outputs for pH and temperature, galvanically | ||
Load: | isolated | ||
Connection terminal: | Max. 600 0 | ||
3-pin, 8-pin, 9-pin and 13-pin terminal, detachable blocks | |||
Mechanical specifications: | |||
Dimensions (W x H x D): | 144 x 144 x 111.5 mm | ||
Weight: | 745g (unit) / 1100g (Packed) | ||
Environmental rating: | IP 65 (NEMA 4X) |
Messgeräte für pH, COND, DO, ISE
Produkt Details
- Schützt vor zu hohem Fluorid Level der Proben durch sensitive, selektive, zuverlässige und verifizierbare Messungen
- Schnellste höchst stabile Messungen, mit geringer Kalibrierhäufigkeit aufgrund der geringen Drift der überlegenen Orion Fluorid Elektroden Technologie.
- Erzielt eine hohe Richtigkeit bei der Messung des Gesamtfluorids durch die Beseitigung der Störungen durch Trübung und verteilte Feststoffe.
- Nachweisgrenze von 10 ppb - das Orion 2109XP bietet ein kontinuierliches Monitoring in einer Vielzahl von Proben
- Fortschrittliches Benutzerschnittstelle mit detaillierten Kalinrations-, Messungs- und Diagnostic Logs für frühzeitige Informationsübermittlung, konfigurierbar nach Ihren Vorstellungen, auf Wunsch auch Password geschützt.
- Minimiert den Wartungsaufwand da keine aufwendigen beweglichen Teile und keine Pumpen vorhanden sind, die häufige Wartung und Verschleißteile benötigen.
- Einfache Installation in Minuten - das Orion 2109XP ist past an Orion 1809AO Montageplätze
- Annerkannte EPA Methode für die Fluorid Analyse mittels Ionenselektiver Elektrode (ISE)