0208 / 305-505-0

Thermo Orion


Seit über 40 Jahren sind Orion-Produkte bekannt für qualitativ hochwertige Messgeräte, Elektroden und Lösungen für elektrochemische Analysen. Die Produkte werden in einer breiten Palette von Industrien für eine Vielfalt von Labors und Feldanwendungen verkauft. Das Ziel des Wasserqualitäts-Produktangebots ist der Schutz von Mensch und Umwelt. Nachfolgend finden Sie eine Zusammenstellung von einigen der vielen Anwendungsmöglichkeiten für unsere Produkte.

Beispielanwendungen für Orion Produkte:

 

    • pH
    • Trinkwasser
    • Abwasser
    • Kosmetika
    • Nahrungsmittel und Getränke
    • Pharmazeutika
    • ISE
    • Trinkwasser - Fluorid, Cyanid
    • Abwasser - Ammoniak
    • Wein - Kalium
    • Milchprodukte - Chlorid, Calcium
    • Handelsübliche Pharmazeutika - Calcium, Fluorid
    • Titration
    • Trinkwasser
    • Abwasser
    • Chemie
    • Petrochemie
    • Pharma
    • Kosmetik
    • Nahrungsmittel und Getränke
    • Kolorimetrie
    • Trinkwasser - Freies und Gesamtchlor, -fluorid
    • Wasserqualität - Phosphat, Nitrat
    • Turbimetrie
    • Trinkwasser
    • Wasserqualität
    • Wein - Kalium
    • Milchprodukte - Chlorid, Calcium
    • Handelsübliche Pharmazeutika - Calcium, Fluorid
    • Leitfähigkeit
    • Trinkwasser
    • Pharma
    • Zellstoff und Papier
    • Umwelt
    • gelöster Sauerstoff
    • Abwasser
    • Wasserqualität
    • Aquakulturen
    • Brauereien und Weinkellereien

Messgerät für pH, COND, DO, ISE

Projektierung auf Anfrage.

Spezifikation:

 

1102PH  
pH Range: - 2.00 to 16.00
Accuracy: 0.01 pH
Resolution: 0.01 pH
mV Range: to 100%/-1000 to 1000mV
Accuracy: 1.0 mV
Resolution: 1 mV
Temperature: 125.0 °C (14.0 to 257.0 °F)
Resolution: 0.1 °C / °F
Relative Accuracy 1.0 °F)
Temperature Sensor: Ptl00/ Pt1000 (jumper selectable); 2 or 3 wire
Temperature Compensation: Auto / manual (reference at 25°C)
pH input: BNC (impedance); Asymmetrical / Symmetrical
Set-point and Controller functions - relay 1,2:  
Function (switchable): P/PI contra I (pulse length/pulse frequency); limit control
Integral time: to 999.9 minutes
Adjustable period with pulse length controller: 0.5 to 20 sec.
Adjustable period with pulse frequency controller: 60 to 120 pulses/min
Dropout delay: to 2000 seconds
Wash cycle: 0.1 to 199.9 hours
Wash duration: 1 to 1999 seconds
Switching Dissolved oxygen hysteresis: to 10 % of full scale
Contact outputs, controller: 1 SPDT, 3 SPST relays
power: Max. 250 VAC / Max 3A / Max 600VA - resistive load only
Alarm functions:  
Function (switchable): Latching / pulse
Pickup delay: to 2000 seconds
power: Max. 250 VAC / Max 3A / Max 600VA - resistive load only
Alarm control Steady or pulse
Contact outputs 1 SPDT reJay
Display:  
LCD: UV coat, backlit 14 segments display with symbols for status information
Backlight: On/Off selectable with four level of brightness contral
Electromagnetic compliance (EMC) specifications:  
Emitted interference: According to EN 50081-1
Immunity to interference: According to EN 50082-1
Environmental conditions:  
Ambient temperature operating range: to 40°C
Maximum relative humidity: 80% up to 31°C decreasing linearly to 50% at 40°C
Power supply:  
Input: 80 to 250 VAC/DC 50/60 Hz Approx. 10VA
Main fuse: 250 mA anti-surge, S504 BUSSMANN
Transient overvoltage category: 11
Pollution degree: 2
Electrical data and connections:  
Signal output: Two 0/4 to 20 mA outputs for pH and temperature, galvanically isolated
Load: (1
Connection terminal: 3-pin, 8-pin, 9-pin and 13-pin terminal, detachable blocks
Mechanical specifications:  
Dimensions (W x H x D): 144 x 144 x 111.5 mm
Weight: 745g (unit) / 1100g (Packed)
Environmental rating: IP 65 (NEMA 4X)
 

Messgeräte für pH, COND, DO, ISE

Projektierung auf Anfrage.

Spezifikation:

 

1103DO  
Dissolved Oxygen measuring range: 0.00 to 20.00 mg/I or 0.0 to 200.0% saturation
Relative accuracy: 1.5 % of full scale reading for both ranges
Resolution: 0.01 mg/l or 0.1 %
Temperature measuring range: 125.0 °C (14.0 to 257.0 °F)
Resolution: 0.1 °C / °F
Relative accuracy 1.0 °F)
Temperature sensor: Ptl00 /Ptl000 (jumper selectable); 2 or 3 wire
Temperature compensation: Auto / manual
Pressure compensation: kPa / mmHg (Manual setting and automatie correction)
Salinity compensation: 0.0 to 50.0 ppt (g/L) (Manual setting and automatie correction)
Dissolved Oxygen input: Screw terminal
Set-point and Controller functions - relay 1, 2:  
Function (switchable): P/PI contra I (pulse length/pulse frequency); limit contra I
Integral time: to 999.9 minutes
Adjustable period with pulse length controller: 0.5 to 20 sec.
Adjustable period with pulse frequency controller: 60 to 120 pulses/min
Dropout delay: to 2000 seconds
Wash cycle: 0.1 to 199.9 hours
Wash duration: 1 to 1999 seconds
Switching Dissolved oxygen hysteresis: to 10 % of full scale
Contact outputs, controller: 1 SPDT, 3 SPST relays
power: Max. 250 VAC / Max 3A / Max 600VA - resistive load only
Alarm functions:  
Function (switchable): Latching / pulse
Pickup delay: to 2000 seconds
power: Max. 250 VAC / Max 3A / Max 600VA - resistive load only
Alarm control Steady or pulse
Contact outputs 1 SPDT relay
Display:  
LCD: UV coat, backlit 14 segments display with symbols for status information
Backlight: On/Off selectable with four level of brightness contra I
Electromagnetic compliance (EMC) specifications:  
Emitted interference: According to EN 50081-1
Immunity to interference: According to EN 50082-1
Environmental conditions:  
Ambient temperature operating range: to 40°C
Maximum relative humidity: 80% up to 31°C decreasing linearly to 50% at 40°C
Power supply:  
Input: 80 to 250 VAC/DC 50/60 Hz Apprax. 10VA
Main fuse: 250 mA anti-surge, S504 BUSSMANN
Transient overvoltage category: 11
Pollution degree: 2
Electrical data and connections:  
Signal output: Two 0/4 to 20 mA outputs for pH and temperature, galvanically isolated
Load: 0
Connection terminal: 3-pin, 8-pin, 9-pin and 13-pin terminal, detachable blocks
Mechanical specifications:  
Dimensions (W x H x D): 144 x 144 x 111.5 mm
Weight: 745g (unit) / 1100g (Packed)
Environmental rating: IP 65 (NEMA 4X)
 

Messgeräte für pH, COND, DO, ISE

Projektierung auf Anfrage.

Spezifikation:
 

 

1104CO    
Conductivity measuring range: Conductivity Measuring Range Resolution
1   to 2.000 µS/cm 0.001µS/cm
2   to 20.00 µS/cm 0.01 µS/cm
3   to 200.0 µS/cm 0.1 µS/cm
4   to 2000 µS/cm 1 µS/cm
5   to 20.00 mS/cm 0.01 mS/cm
6   to 200.0 mS/cm 0.1 mS/cm
7   to 1000 mS/cm 1 mS/cm
  Relative accuracy: ± 1. % of full scale reading (± 2 % > 500 mS/cm)  
  System acuracy: Total system accuracy dependent upon sensor specification  
Temperature: -10.0 to + 125.0 °C (14.0 to 257.0 °F)  
  Resolution: 0.1 °C / °F  
  Relative accuracy ± 0.5 °C (± 1.0 °F)  
Temperature sensor: Ptl00 /Ptl000 (jumper selectable); 2 or 3 wire  
Temperature compensation: Auto / manual  
Conductivity input Screw terminal  
Set-point and Controller functions - relay 1,2:    
  Function (switchable): P/PI control (pulse length/pulse frequency); limit contral  
  Integral time: 0 to 999.9 minutes  
  Adjustable period with pulse length controller: 0.5 to 20 sec.  
  Adjustable period with pulse frequency con- 60 to 120 pulses/min  
troller: 0 to 2000 seconds  
  Pickup I Dropout delay: 0.1 to 199.9 hours  
  Wash cycle: 1 to 1999 seconds  
  Wash duration: 0 to 10 % of full scale  
  Switching Dissolved oxygen hysteresis: 1 SPDT, 3 SPST relays  
  Contact outputs, controller: Max. 250 VAC / Max 3A / Max 600VA - resistive load only  
  Switching voltage I current I power:    
Alarm functions:    
  Function (switchable): Latching / pulse  
  Pickup delay: 0 to 2000 seconds  
  Switching voltage I current I power: Max. 250 VAC / Max 3A / Max 600VA - resistive load only  
  Alarm control Steady or pulse  
  Contact outputs 1 SPDT relay  
Display:    
  LCD: UV coat, backlit 14 segments display with symbols for status  
  Backlight: information  
    On/Off selectable with four level of brightness control  
Electromagnetic compliance (EMC) specifications:    
  Emitted interference: According to EN 50081-1  
  Immunity to interference: According to EN 50082-1  
Environmental conditions:    
  Ambient temperature operating range: 0 to 40 °C  
  Maximum relative humidity: 80% up to 31 °C decreasing linearly to 50% at 40°C  
Power supply:    
  Input: 80 to 250 VAC/DC 50/60 Hz Approx. lOVA  
  Main fuse: 250 mA anti-surge, S504 BUSSMANN  
  Transient overvoltage category: II  
  Pollution degree: 2  
Electrical data and connections:    
  Signal output: Two 0/4 to 20 mA outputs for pH and temperature, galvanically  
  Load: isolated  
  Connection terminal: Max. 600 0  
    3-pin, 8-pin, 9-pin and 13-pin terminal, detachable blocks  
Mechanical specifications:    
  Dimensions (W x H x D): 144 x 144 x 111.5 mm  
  Weight: 745g (unit) / 1100g (Packed)  
Environmental rating: IP 65 (NEMA 4X)
 

Messgeräte für pH, COND, DO, ISE
 

Produkt Details
 

  • Schützt vor zu hohem Fluorid Level der Proben durch sensitive, selektive, zuverlässige und verifizierbare Messungen
  • Schnellste höchst stabile Messungen, mit geringer Kalibrierhäufigkeit aufgrund der geringen Drift der überlegenen Orion Fluorid Elektroden Technologie.
  • Erzielt eine hohe Richtigkeit bei der Messung des Gesamtfluorids durch die Beseitigung der Störungen durch Trübung und verteilte Feststoffe.
  • Nachweisgrenze von 10 ppb - das Orion 2109XP bietet ein kontinuierliches Monitoring in einer Vielzahl von Proben
  • Fortschrittliches Benutzerschnittstelle mit detaillierten Kalinrations-, Messungs- und Diagnostic Logs für frühzeitige Informationsübermittlung, konfigurierbar nach Ihren Vorstellungen, auf Wunsch auch Password geschützt.
  • Minimiert den Wartungsaufwand da keine aufwendigen beweglichen Teile und keine Pumpen vorhanden sind, die häufige Wartung und Verschleißteile benötigen.
  • Einfache Installation in Minuten - das Orion 2109XP ist past an Orion 1809AO Montageplätze
  • Annerkannte EPA Methode für die Fluorid Analyse mittels Ionenselektiver Elektrode (ISE)